CIOKS CRUX
The Crux of Your Setup!
CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal.
Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go.
Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting additional pedals.
Main Features:
• Future Power Generation high current addon for DC7
• Profile of only 2.5 cm
• Powers a Neural DSP Quad Cortex with DC7 saving you 4 outlets on the DC7
• Overload and short circuit protected outlet
• Overvoltage protected outlet protecting your equipment
• Compatible with CIOKS MiniGRIP for drill-free mounting underneath Pedaltrain boards*
• 24V DC Link cable included
• Mounting hardware for Pedaltrain and Templeaudio boards and hex-key included
• Compatible with CIOKS miniGRIP for drill-free mounting on Pedaltrain boards (sold separately)
• 2 Flex cables included:
o 1 x Flex 1050 – black with 5.5/2.1 mm centre negative DC plug, 50 cm
o 1 x Flex 3050 – yellow with 5.5/2.5 mm centre positive DC plug, 50 cm
• Designed in Denmark, assembled in Europe
Information:
Das Produkt wurde vor dem 13. Dezember 2024 vom Hersteller auf den Markt gebracht
und von uns auch schon vor dem 13. Dezember 2024 zum Verkauf angeboten.
Es besteht Konformität des Produkts nach Richtlinie 2001/95/EG.
Leider sind noch keine Bewertungen vorhanden. Seien Sie der Erste, der das Produkt bewertet.
Sie müssen angemeldet sein um eine Bewertung abgeben zu können. Anmelden
